Cleaning Instructions CLEANING WINDOW OR GLASS You may use paper towels or newspaper. You may use Windex or 1 part vinegar and 5 parts water. Note: Keep Windex and other ammonia-based products away from brass handleset. CLEANING DOORS You may use mild solution of soap and water. You may use non-abrasive soft scrub. CARING FOR BRASS HANDLESETS Remove handleset. Soak in lacquer thinner or mineral spirits. Remove and wash with soap and water; let dry thoroughly. Clean with good quality brass cleaner; such as Brasso. Reapply urethane coating in thin light coats; ensuring each coat is dry before applying another. Reinstall handle. Painting or Staining Instructions REMOVE STICKERS Use vegetable oil or WD-40. Important: If serial number sticker is removed, please retain for door registration and future warranty needs. SANDING Lightly sand with 300-500 grit wet/dry sandpaper, only to rough the surface. If sanding an aluminum door, do NOT sand to the bare aluminum. CLEANING Clean with mild solution of soap and water. Allow door to dry completely before proceeding with painting. Note: Keep Windex and other ammonia-based products away from brass handle set. SPRAY PAINT (For aluminum doors only) Use Spray Rustoleum Paint or Spray Automotive finish. Apply paint per manufacturer¹s recommendation. Apply thin layer of paint coats. Make sure each layer is thoroughly dry before applying the next coat. PAINTING (For UltraCore® doors only) Use Exterior Semi-Gloss latex paint. Apply paint per manufacturer¹s recommendation. Apply thin layer of paint coats. Make sure each layer is thoroughly dry before applying the next coat. STAINING (For UltraCore® doors only) Use a name brand gel stain. Follow manufacturer's instructions. After staining, apply a high-quality exterior grade polyurethane.